Table of Contents
Advertisement
10. Install the system board module access panel.
11. Install the system board module into the chassis.
12. Connect all peripheral cables to the server.
13. Power up the server.
The installation is complete.
More information
Remove the system board module from the chassis
Remove the system board module access panel
Install the system board module access panel
Install the system board module into the chassis
HPE Smart Storage Battery cabling
Secondary riser board components
HPE Trusted Platform Module 2.0 Gen10 Plus option
Overview
Use these instructions to install and enable an HPE TPM 2.0 Gen10 Plus Kit in a supported server. This option is not
supported on Gen10 and earlier servers.
This procedure includes three sections:
1. Installing the Trusted Platform Module board.
2. Enabling the Trusted Platform Module.
3. Retaining the recovery key/password.
HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft Windows Server 2012 R2
and later. For more information about operating system support, see the product QuickSpecs on the Hewlett Packard
Enterprise website (https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive
Encryption feature, see the Microsoft website (https://www.microsoft.com).
Hardware options installation
81
Advertisement
Table of Contents
