4. Press Enter to clear the warning.
5. Enter the serial number and press Enter.
6. Select Product ID. The following warning appears: Warning: The Product ID should ONLY be
modified by qualified service personnel. This value should always match the
Product ID located on the chassis.
7. Enter the product ID and press Enter.
8. Press the F10 key to confirm exiting System Utilities. The server automatically reboots.
HPE Trusted Platform Module 2.0 Gen10 Option
The HPE Trusted Platform Module 2.0 Gen10 Option is not a customer-removable part.
CAUTION: If the TPM is removed from the original system and powered up on a different system, data stored in the
TPM including keys will be erased.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact a authorized service
provider for a replacement system board and TPM board.
116
Removal and replacement procedures