Table of Contents
Advertisement
9.
Install the node cover.
10. Install the server.
11. Connect all peripheral cables to the server.
12. If removed, connect the tube set.
13. Power up the server.
The installation is complete.
HPE Trusted Platform Module 2.0 Gen10 Plus option
Overview
Use these instructions to install and enable an HPE TPM 2.0 Gen10 Plus Kit in a supported server. This option is not
supported on Gen10 and earlier servers.
This procedure includes three sections:
1. Installing the Trusted Platform Module board.
2. Enabling the Trusted Platform Module.
3. Retaining the recovery key/password.
HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft Windows Server 2012 R2 and
later. For more information about operating system support, see the product QuickSpecs on the Hewlett Packard Enterprise
website (https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive Encryption feature,
see the Microsoft website (https://www.microsoft.com).
CAUTION: If the TPM is removed from the original server and powered up on a different server, data stored in the TPM
including keys will be erased.
Hardware options installation
83
Advertisement
Table of Contents
