WAGO-I/O-SYSTEM 750
750-632 Proportional Valve Module
9.1.1.2
Navigation Area
In the navigation area, there are eight different buttons that can be used to
configure the I/O module:
•
"Operating Mode" menu item
•
"Module Parameters" menu item
•
"Digital Inputs" menu item
•
"Ramp Settings" menu items
•
"Dither Generator" menu items
•
"Valve Adjustment" menu item
•
"Linearization" menu item
•
"Position" menu item
9.1.1.3
Application Area
Depending on the selection made in the navigation bar, the individual settings can
be executed here.
Observe function descriptions!
A detailed explanation of the subsequently listed functions can be found in the
"Function Description" section!
Manual
Version 1.3.0, valid from FW/HW-Version 01/01
Commissioning
83