Application Area; Status Messages; Figure 33: Expanding The Status Messages Window; Table 40: Status Messages - Possible Status Messages With Additional Information - WAGO 750-486 Manual

72 Commissioning
7.1.1.5

Application Area

Click one of the menu items in the vertical tab menu to call up the related
parameterization options in the application area.
7.1.1.6

Status Messages

Activate diagnostics!
Activate the diagnostics in the Channel settings menu item to receive status
messages!
This area provides information about occurring diagnostics. If you have activated
diagnostics in the Channel settings menu item and a diagnostic occurs, the
diagnostic is displayed in the status messages window. These status messages
are determined from the status bytes of the individual channels.
Click the button to expand the Status Messages window at the bottom of the
parameterization dialog to display the status messages.

Figure 33: Expanding the Status Messages Window

The following status messages with corresponding additional information are
displayed:
Table 40: Status Messages – Possible Status Messages with Additional Information
Status message
Measurement range overflow
Measurement range underflow
User-defined limiting value
overrange
User-defined limiting value
underrange
Short circuit
Wire break
Channel deactivated
Measured values in permissible
range
The status messages are displayed with assignment of the relevant I/O module
channels.
Manual
Version 1.1.2
WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
Error type Channel
Warning x
Warning x
Warning x
Warning x
Error x
Information x
Error x
Information x
Information x
Information x
Status byte
0x42
0x41
0x04
0x08
0x50
0x00
0x60
0x00
0x00
0x00