Checking The Ink Status With The Ink Lamps On The Operation Panel - Canon MG3500 Series Online Manual

Checking the Ink Status with the Ink Lamps on the Operation Panel

Note
The ink level detector is mounted on the machine to detect the remaining ink level. The machine considers as ink is
full when a new FINE cartridge is installed, and then starts to detect a remaining ink level. If you install a used FINE
cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a
guide.
When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash orange to inform you of the
error. Count the number of flashes and take appropriate action.
If an Error Occurs
In the copy standby mode, you can check the ink status with the Color Ink lamp and Black Ink lamp.
* All the lamps on the operation panel are shown lit in the illustration below for explanatory purposes.
(A) Alarm lamp
(B) Color Ink lamp
(C) Black Ink lamp
Color Ink lamp or Black Ink lamp lights
The ink is running low. Prepare a new ink cartridge.
Color Ink lamp or Black Ink lamp flashes, while Alarm lamp flashes
An error has occurred.
If an Error Occurs
* For some types of errors, the Alarm lamp may not flash.
Note
You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
95