16 Assembly Replacement Procedures; What You Will Find In This Chapter - Keysight Technologies Option 503 Service Manual

Keysight Technologies
N9030A PXA Signal Analyzer
Service Guide

16 Assembly Replacement Procedures

What You Will Find in This Chapter

Procedures in this chapter enable you to locate, remove, and replace the
following major assemblies in your instrument.
Refer to
descriptions, and ordering information.
Chapter 15, "Replaceable Parts."
Instrument Outer Case on page 422
Top Brace and Power Supply Bracket on page 424
RF Area (Options 503, 508, 513, 526) on page 426
Microwave Options MPB and LNP on page 439
RF Area (Options 543, 544, 550) on page 461
Millimeter Wave Options MPB and LNP on page 473
RF Front End Assembly on page 481
Front End Control Assembly on page 484
LO Synthesizer Assembly on page 486
Reference Assembly on page 488
Option B1X on page 491
Option BBA on page 493
Midplane Board Assembly on page 494
Rear Panel on page 496
Power Supply Assembly on page 497
CPU Assembly on page 499
Disk Drive on page 501
AIF/DIF Assembly on page 507
Motherboard Assembly on page 511
Fan Assembly on page 516
Input Connector Assembly on page 520
for part numbers, assembly
417