Table of Contents
Advertisement
Assembly Replacement Procedures
Midplane Board Assembly
Midplane Board Assembly
Removal
1. Remove the instrument outer case. Refer to the
2. Remove the top brace and power supply bracket. Refer to the
3. Refer to
Figure 16-75
Assembly Locations
4. Remove the processor assembly. Refer to the
5. Remove the rear panel. Refer to the
6. Remove the power supply assembly. Refer to the
494
removal procedure.
and Power Supply
Bracketremoval procedure.
Figure
16-75. Locate the Midplane Board assembly (4).
procedure.
removal procedure.
Instrument Outer Case
CPU Assembly
Rear Panel
removal procedure.
Power Supply Assembly
N9030A PXA Signal Analyzer Service Guide
Top Brace
removal
Advertisement
Table of Contents
Troubleshooting
