Keysight Technologies Option 503 Service Manual page 121

Instrument Messages
Event Messages
Err# Message
–124
Too many digits
–128
Numeric data not allowed
–130
Suffix error
–131
Invalid suffix
–134
Suffix too long
–138
Suffix not allowed
–140
Character data error
–141
Invalid character data
–144
Character data too long
–148
Character data not
allowed
–150
String data error
–151
Invalid string data
–158
String data not allowed
–160
Block data error
–161
Invalid block data
–168
Block data not allowed
–170
Expression error
–171
Invalid expression
N9030A PXA Signal Analyzer Service Guide
Verbose/Correction Information
The mantissa of a decimal-numeric contained more than 255
digits, excluding leading zeros.
A legal numeric data element was found, but that is not a valid
element at this position in the command.
A problem was found in a suffix (units). The exact problem
cannot be specifically identified.
There is a syntax problem with the suffix. You need to use the
suffix (units) that are allowed by this command.
The suffix contained more than twelve characters.
A suffix was found after a numeric element that does not allow
suffixes (units).
A problem was found with a character data element. The exact
problem cannot be specifically identified.
Either the character data element contains an invalid character
or the element itself is not valid for this command.
The character data element contains more than twelve
characters.
A character data element that you sent is valid, but it is not
allowed in this point in the parsing.
A problem was found with a string data element. The exact
problem cannot be specifically identified.
A string type of data element was expected, but it is invalid for
some reason. For example, an END message was received
before the terminal quote character.
A string data element that you sent is valid, but it is not allowed
at this point in the parsing.
A problem was found with a block data element. The exact
problem cannot be specifically identified.
A block data element was expected, but it was invalid. For
example, an END message was received before the end length
was satisfied.
A legal block data element was found, but it is not allowed at this
point in the parsing.
A problem was found with an expression data element. The exact
problem cannot be specifically identified.
An expression data element is not valid. For example, there may
be unmatched parentheses or an illegal character.
121