Table of Contents
Advertisement
Overview
Instrument Maintenance
Battery Information
The X-Series Signal Analyzer uses an internal 3.0 VDC battery that contains
Lithium/Manganese Dioxide (Li/MnO2). The battery is located on the A4 CPU
assembly to power the instrument clock and back up data in SRAM. When the
battery is exhausted and ready for disposal, dispose of it according to your
country's requirements. The Keysight part number is
manufacturer's part number is CR2032. You can return the battery to your
nearest Keysight Technologies Sales and Service office for disposal, if required.
Refer to
Technologies Sales and Service offices.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended. Discard used
batteries according to the manufacturer's instructions.
Do not throw batteries away but collect as small chemical waste.
28
"Contacting Keysight Technologies" on page 45
1420-0356
for a list of Keysight
N9030A PXA Signal Analyzer Service Guide
(CR2032). The
Advertisement
Table of Contents
Troubleshooting
