Replacement - Keysight Technologies Option 503 Service Manual

Assembly Replacement Procedures
AIF/DIF Assembly

Replacement

1. Slide the AIF/DIF assembly into the slot at the rear of the instrument and
2. Refer to
3. Refer to
4. Replace the rear panel. Refer to the
5. Replace the instrument outer case. Refer to the
510
push on the assembly to mate the connectors to the motherboard
assembly.
Figure 16-85. Replace cables W25, W36, and W42 to the AIF
assembly.
Figure 16-84. Replace cable W26, W39, W42, and W47 to the
bottom of the DIF assembly.
replacement procedure.
Rear Panel replacement procedure.
Instrument Outer Case
N9030A PXA Signal Analyzer Service Guide