Table of Contents
Advertisement
Assembly Replacement Procedures
Power Supply Assembly
Power Supply Assembly
Removal
1. Remove the instrument outer case. Refer to the
2. Remove the rear panel. Refer to the
3. Refer to
4. The power supply assembly can be removed from the chassis by pulling
Figure 16-78
Power Supply Assembly Removal
N9030A PXA Signal Analyzer Service Guide
removal procedure.
Figure
16-78. Remove the three screws (1) (0515-1227)
attaching the power supply to the chassis.
straight out the back.
Instrument Outer Case
Rear Panel
removal procedure.
497
Advertisement
Table of Contents
Troubleshooting
