Esd Information - Keysight Technologies X-Series Manual

ESD Information

Protection from Electrostatic Discharge
Electrostatic discharge (ESD) can damage or destroy electronic components. All work on electronic
assemblies should be performed at a static-safe workstation.
static-safe workstation using two types of ESD protection:
— Conductive table-mat and wrist-strap combination.
— Conductive floor-mat and heel-strap combination.
Both types, when used together, provide a significant level of ESD protection. Of the two, only the
table-mat and wrist-strap combination provides adequate ESD protection when used alone. To
ensure user safety, the static-safe accessories must provide at least 1 megohm of isolation from
ground.
These techniques for a static-safe workstation should not be used when working on circuitry
with a voltage potential greater than 500 volts.
Figure 1 Example of a Static-Safe Workstation
Installation Note N9042-90013
ESD Information
Figure 1 shows an example of a
5