General Information; Accessories; Probes, Cables, And Accessories; Chassis And Software - Keysight Technologies U4164A Service Manual

1

General Information

Accessories

One or more of the following accessories, sold separately, are required to set up and operate the
U4164A logic analyzer module for testing and servicing it.

Probes, Cables, and Accessories

Refer to the U4164A Data Sheet (5992-1057EN) on
interposers, probes, and cables for U4164A. Details of these interposers, probes, and cables are in
their respective user guides available on www.keysight.com.

Chassis and software

The U4164A logic analyzer requires:
•
•
•
Refer to the
about AXIe chassis, host PC, and the Logic Analyzer software installation.
12
An AXIe chassis such as an M9502A or M9505A Keysight AXIe chassis that provides slots for
installing the U4164A module.
A host PC which is a laptop or a desktop PC with PCIe or USB interface. The host PC connects to
the Keysight AXIe chassis via PCIe/USB interface and is used to host all the required software
components of the U4164A module for configuring, controlling, and using this module.
Keysight Logic Analyzer software version 06.20 or higher to configure, control, and use the
U4164A module.
AXIe based Logic Analysis & Protocol Test Modules Installation Guide
www.keysight.com to get a list of supported
Keysight U4164A Logic Analyzer Service Guide
to learn more