Table of Contents
Advertisement
Battery Usage
A fully charged battery should last about four hours.
Battery charge status is viewable:
In the upper-right corner of the screen.
On the battery. To view the LCD gauge, open the
FieldFox battery compartment door.
To conserve battery power:
Use Hold mode to trigger a measurement only when
needed.
Press System then
dim the FieldFox display as much as possible.
Briefly press the power button to switch to Stand by
mode when not being used. Press again to restore
power. All current settings are preserved.
The FieldFox will shutdown automatically when battery
power is very low to prevent it from being completely
discharged.
Use ONLY a FieldFox charger to recharge a battery.
The battery can be fully charged while in the FieldFox in
about 4 hours with the FieldFox either ON or OFF.
A fully discharged battery takes about 1.5 hours to
recharge to 80%.
The battery can be fully charged in about 4 hours using
the external battery charger (Opt 872).
is shown on the display.
Hold
then
Display
3
Brightness
then
Advertisement
Table of Contents
