How To Play A Data Log - Keysight Technologies FieldFox B Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Use Data Logging (OTA Options 370, 372, 377, and 378)
Learn more, refer to
page

How to Play a Data Log

— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
—
Keysight N9938-90006 User's Guide
— Then Recall Log
— Auto Save (default = OFF)
— Then Back
c. Optional: Press
— Record Indoor Data
refer to Chapter 16
Setup Procedure" on page
— Then choose
Record Data,
Chapter 16
486. See also, Chapter 32, "File Management."
More > Data Logging
— Then Recall Log File
——Then Recall File
— Then Play to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume Temporarily halts playback. Then choose from the following:
— Pause Resume
Stop Immediately stops playback. Then choose from the following:
— Play Start playback from trace 1.
— Recall Log File Opens a list of stored data files.
Select a file to playback.
— Recall File
File.
Indoor Map Data Logging
or Recall Indoor Log
Mapping and
474.
Navigate OFF ON,
More
Mapping and "Setting up Data Logging" on
> Playback
and select a file
Press to continue playing.
then
File. Learn more,
"Option 352 Indoor Maps
Data Selection, Zoom, Pan,
397