Keysight Technologies FieldFox B Series User Manual page 462

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Install Node.js and Running the FieldFox Mapping Software
How to Install Node.js and Running the FieldFox Mapping Software
IMPORTANT! If your FieldFox is connected directly to the LAN, you can skip
the section on downloading Node.js and go to
When the FieldFox Is On The LAN" on page
This section contains the procedure to download Node.js to access
OpenStreetMap files and to process and save those files using the FieldFox
mapping software. For details on how to use these files once they are
downloaded to the FieldFox, refer to
page
1. Open an HTML5 compatible browser and download Node.js to a PC (e.g.,
IMPORTANT!
Do not change the default name of the directory path for downloading the
Node.js program, because FieldFox uses the default program path name to
run the Mapping feature. Refer to
Examples of Web Browsers that not supported are Internet Explorer 6, 7,
and 8.
2. Run the Node.JS installation file, by accepting the wizard's defaults (i.e.,
462
471.
Google Chrome, Mozilla Firefox, Safari, or Microsoft Edge):
https://nodejs.org/en/download
including leaving the "Automatically install the necessary
tools. Note that..." checkbox empty (unchecked)). Refer to
16-4 and Figure 16-5 on page
"How to Set Up Mapping
472.
"How to Set Up Mapping Settings" on
Figure 16-4.
463.
Keysight N9938-90006 User's Guide
Figure