Keysight Technologies FieldFox B Series User Manual page 383

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
4. When done press Stop. The log file is automatically saved to the defined
Learn more about file settings, refer to
5. Press
Playing a Data Log and Viewing the Data
To play the log results:
1. Press
2. Press
3. Optional: Press Scale/Ampltd
Keysight N9938-90006 User's Guide
— Data Selection
data channel, sort type, and sort order. See also previous
step 8
Settings" on page
— Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
— Labels & Icons
map data point labels and icon types.
Labels OFF ON
Icons
Flag Point Line
— Save Image (PNG)
*.png file (default filename is "Pilgrimage").
Device Type and File Type (i.e., when you press Done).
Else, edit the file name, and then press Done.
See also, Chapter 16 Mapping and
page 486.
Back
Record Save/Recall
And, use the Use the RPG or the
played.
Recall File > Back
Then choose:
Opens a softkey menu to set the active
in "How to Set Up Over–the–Air (OTA) Mode
353.
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When enabled,
a label is displayed for every map data point (e.g., "Data
1"). When disabled, labels are not displayed for the map
data points.
Sets the type of icon that is used to display a map's data
points (default = Flag).
Saves the current displayed map to a
"Setting up Data Logging" on
Chapter 32, "File Management."
> Recall Log File
arrow keys to highlight the file to be
> Play
383