Keysight Technologies FieldFox B Series User Manual page 147

Keysight Handheld Analyzers
N99xxB User's Guide
9 SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
To better reflect the enhancements implemented during the alignment
process, for firmware versions
referred to as "Channel Equalization" or "Channel Equalization Alignment"
(ChanEQ
SA Mode measures signals at the SA RF IN connector.
SA Mode measurements require NO calibration.
For a comprehensive SA mode tutorial, see Spectrum Analysis Basics
(Application Note 150) at
https://www.keysight.com/us/en/assets/7018-06714/application-notes/595
2-0292.pdf
For information on using the FieldFox Remote Viewer which enables you to
view the FieldFox from your iOS device, refer to
https://www.keysight.com/us/en/assets/7018-04070/application-notes/599
1-2938.pd f
Figure 9-1 SA Display with Markers
>
Alignment).
147
A.10.15 "IF Flatness Alignment" is now