Advertisement
System Settings
Service Diagnostics
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the
Event Log
The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press
Battery
Learn more in
793
Internal Temperatures
Learn about the importance of the internal FieldFox temperatures in
Temperature Protection" on page 32
Erase User Data
IMPORTANT!
The process in this section erases all User Data from the FieldFox. Before
proceeding, Keysight strongly recommends that you back up all of your
User Data to an external storage device. refer to
page
All data that you have written to the FieldFox can be erased with the press of a
button. You would do this if your FieldFox is located in a secure environment
and must be routinely erased of sensitive data.
All data is removed from the FieldFox internal "UserData" partition. This
includes all State files and Trace + State files (*.sta), all Data files (*.csv, *.snp),
all Picture files (*.png), all Cal Kit files, and all Cable files.
External media that is inserted (mini-SD card or USB flash drive) is NOT
erased.
The "Lost Clusters" folder and files are NOT erased because they are part of
the file system housekeeping.
770
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in
Calibration" on page
831.
Clear Events
to erase this information.
Chapter 33, "Working with the Lithium-Ion Battery", on page
.
768.
.
"How to backup files" on
Keysight N9938-90006 User's Guide
"Instrument
"FieldFox High
Advertisement
Chapters
