Keysight Technologies FieldFox B Series User Manual page 384

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
4. Press
To pause the log play:
1. Press
2. Press
Learn more, refer to
page
Save 5: Save the Log Results:
Two file types are supported for save or recall log results:
— KML file format
— CSV file format. Files stored into this format can be imported into
384
— Optional (Bar Chart and Spectrum only): To adjust the following, use
the RPG (fine adjust) or the
change the color bar.
— Autoscale
current measurement.
— Ref Pos
— Scale
100 dB).
— Ref Level
Chart, Strip Chart, and Spectrum.
— Red Limit
Bar chart only.
— Blue Limit
(dBm). Bar chart only.
Stop to exit the log playing.
Pause Resume to pause or resume the log playing.
Stop to exit the log playing.
Chapter 16
486.
— Files stored in this format can be imported into 3rd party applications
like Google Earth or Google Maps.
spreadsheet applications.
arrow keys (coarse adjust) to
to have the FieldFox optimize the scale for the
to change the reference line position (0 to 10).
to change the reference line position (0.01 to
to change the top reference position in the Bar
to change the red color high power value (dBm).
to change the blue color low power value
Mapping and "Setting up Data Logging" on
Keysight N9938-90006 User's Guide