Keysight Technologies FieldFox B Series User Manual page 232

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
The USB antenna factors stored in the triaxial antenna itself cannot be
overwritten. The antenna factors on FieldFox imported into FieldFox can be
modified. To reset the antenna factors in FieldFox to the original factors,
re-import the antenna factors.
232
ii. Optional: Press
— Press View Corrections OFF ON
Pink Trace - Antenna/Cable corrections. This is a
composite of all cable/antenna corrections that are
currently applied. Available as a useful visual aid, the
zero "dB" level (no net correction) is mapped to appear
at the -50 dBm on-screen level.
— Press Src/Rcv Split
Source and Receiver side measurements.
f. Optional: Example of editing X, Y, and Z axes manually.
— Press X axis Antenna
menus. Then choose one or more of the following:
— X axis Antenna
factors (default is coupled to other settings).
— Edit Antenna
(if available). Refer to
Factors and Adding New Antenna Factors" on
page
— New
"Editing Antenna Correction Factors and Adding
New Antenna Factors" on page
— Save Antenna
factor or a new X antenna factor. See also See also
Chapter 30, "System Settings"
Numeric Editing" on page
No
– Choose
No
view
— Save Cable Opens a menu to name and save
the cable corrections data
— Recall Cable Recalls the selected cable
correction file from the \Cables folder.
— Storage Device to select the storage device
where your cable correction file is located
(Internal/USB/SD Card)
More then
- selecting Src/Rcv Split selects
– opens the X axis Antenna softkey
– enable/disable the X axis antenna
– to edit the current imported X factor
"Editing Antenna Correction
233.
– to edit/define a new X factor value. Refer to
– to save either an edited X antenna
Keysight N9938-90006 User's Guide
to exit the cable data edit table
to turn ON and OFF
233.
and then to "Alpha
749.