Keysight Technologies FieldFox B Series User Manual page 249

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
Effective Isotropic Radiated Power (EIRP) – (SA Mode Only)
2. Configure Center frequency, Span, Preamp, and RF Attenuation
3. Summary of EIRP setup, per step
4. Start EIRP: Press
5. When done press:
6. Optional: To clear the saved horizontal and vertical EIRP values press:
Keysight N9938-90006 User's Guide
— Save Horizontal
— Save Vertical – Saves the current vertical EIRP value (dBm).
— Clear H & V –Clears the saved horizontal and vertical EIRP values
(dBm).
— Press Freq/Dist >
— Press Freq Span
— Press Scale Amptd >
— Press RF Atten Auto
— Press Rx Ant Gain
— Press Dist to Ant
— Press Rx Cable Loss
— Press Margin Comp
Restart
Save Horizontal and
Save Vertical
Clear H & V
– Saves the current horizontal EIRP value (dBm).
Center > 2 GHz
> 3 MHz (default)
Preamp > ON (default = OFF)
(default = Auto)
.
1
For this example: 30 dB > Enter.).
For this example: 100m (default)
For this example: 2.5 dB
249