Advertisement
System Settings
Preferences
Settings
"CAT (Distance Units)" on page 751
"CAT/NA" on page 752
"SA" on page 753
"Discrete Colors Softkey Menu" on page 754
menu.
Save and Reset Preferences
All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver and Startup
Mode) can also be made from individual softkey selections throughout the
FieldFox menu structure. However, they remain through a FieldFox shut down
ONLY when the current settings are saved as preferences.
The table above shows a list of all of these settings and where they are
discussed in this User's Guide.
How to save current settings as Preferences
— Using softkeys, configure the settings as you would like them to remain.
— Press System 7
— Then
— Then
— Press
Global Settings (Overview)
Choose the Global Settings values (Language, Batter Saver, and Startup
Mode). See also
How to select Global Settings:
— Press System 7
— Then
— Then
— Then use arrow softkeys or the knob to select Global Settings
— Then
742
Preferences
Save Current Settings
saved.
Reset Preferences
"Quick Settings Table" on page
Preferences
Preferences
Edit
for each of the following:
— Language (see)
— Batter Save Mode (see)
- Part of Preferences softkey
There is a beep when your settings have been
to restore the factory default settings.
740.
Keysight N9938-90006 User's Guide
Advertisement
Chapters
