Keysight Technologies FieldFox B Series User Manual page 381

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Data Logging creates a record of your data with a timestamp and GPS stamp
(refer to
log results to include a GPS stamp or use Preferences to enable the timestamp.
Refer to
Features
— Log files contain cell results for different component carriers (CCs)
— Data results can be logged
— Data results can be saved to a *.CSV or *.KML file. Refer to
— User specifies how often results are stored.
Procedure
1. Press
Keysight N9938-90006 User's Guide
"GNSS (GPS+) and GPS" on page
Chapter 30, "System Settings."
including timestamps and/or distance stamps.
— Timestamps are included in log files with or without GPS.
— GPS must be enabled for log altitude results.
See also "GNSS (GPS+) and GPS" on page
the Log Results:" on page
— Time: Store results every "n" seconds
— Altitude: Store results every "n" meters. GPS must be enabled to
store results by altitude.
Trace 6 > More
and set the Record Settings,
Logging
— Record (Outdoor Logging) or
— Play (If you have previously stored data recordings.)
a. Outdoor Mapping only: To set the
— Meas Interval
— Interval Time
— Time Interval
— Distance Interval
b. Then press Record Save/Recall
— Then File Folder Default System
—
756). GPS must be enabled for the
384.
> Data Logging to view the Data Logging softkeys
Record Save/Recall, and
Record
or
Default – Sets the default User Folder path:
——List files (*.csv and *.kml) are save-recalled
to:
"[CurrentDevice]:\RecordPlayback\
OTA\"
756.
"Save 5: Save
Indoor Map Data
Settings—choose:
381