How To Define A Cell Or Cell(S) And Use Ota - Keysight Technologies FieldFox B Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings

How to Define a Cell or Cell(s) and Use OTA

LTE FDD, LTE TDD, 5G TF, 5G NR, and 5G NR EVM Conducted have only one
predefined view (Table). You can define measurements, which can be used to
display up to four different views (windows) simultaneously on the display
screen. You can select which type of data to display in each of the views from
the Trace menu.
Cell definitions consist of the following:
— Set frequency according to DUT requirements
— Define cell settings
— Define component carrier(s) (CCs) settings
Example: Using OTA LTE FDD or 5G TF, refer to:
—
Then:
—
—
—
—
—
Figure 13-19 Cell Definition (LTE FDD) – (LTE TDD is similar)
Step 1: LTE FDD (Option 370), LTE TDD (Option 371), 5G TF (Option
377), and 5G NR (Option 578): Component Carrier (CC) and Cell
Defined
1. Press Preset then
Keysight N9938-90006 User's Guide
"Step 1: LTE FDD (Option 370), LTE TDD (Option 371), 5G TF (Option 377),
and 5G NR (Option 578): Component Carrier (CC) and Cell Defined" on
page 371
"Step 2: Select Trace Type" on page 377
"Step 3. Modify Scale and the Display Color Bar Settings" on page 379
"Step 4: Enable Data Logging and Playback the Results" on page 380
"Save 5: Save the Log Results:" on page 384
"Step 6: Import and Play back KML Files into 3rd Party Software (Example:
Google Earth with Animation Tool)" on page 385
Mode Preset (Factory)
371