Keysight Technologies FieldFox B Series User Manual page 429

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
How to Define a Set Up a Scan and Use Option
You can define measurements by selecting which type of data to display.
Data definitions consist of the following:
— Select the measurement type
— Define the antenna setting, using the antenna settings table
— Define other optional marker, sweep, averaging, bandwidth settings
Example: Refer to:
—
—
—
Then:
—
—
—
—
Step 1. Connect Your Equipment
Connect your equipment similar to
Step 2. Set FieldFox to Use Static IP with Your Ball Antenna
IMPORTANT! The LAN address for first 3 fields must match the Static IP
address of FieldFox. For example, the Ball Antenna's factory IP address is
192.168.0.10, set FieldFox Static IP address to 192.168.0.xx. "xx" must be
different number than shown in the last field of the for Ball Antenna. Refer
to
IMPORTANT! If you forget you N9910X-028 Ball Antenna's static IP
address, refer to this link and the Support tab for assistance:
www.keysight.com/find/fieldfox
Support Document.
— The Ball antenna's default static IP address is: 192.168.1.10
— Set FieldFox to use static IP address:
Keysight N9938-90006 User's Guide
"Step 1. Connect Your Equipment" on page 429
"Step 2. Set FieldFox to Use Static IP with Your Ball Antenna" on page 429
"Step 3. Define the measurement" on page 430
"Step 4: Select Polar Settings" on page 432
"Step 5. Modify Scale and Attenuator Settings" on page 432
"Step 6: Enable Data Logging and Playback the Results" on page 433
"Step 7: Import and Play back KML Files into 3rd Party Software (Example:
Google Earth with Animation Tool)" on page 437
Figure 14-15 on page
Press System
— Then System Configuration
360
Figure 14-1 on page
427.
and then to the Phase Array Antenna
> More > LAN
409.
429