Keysight Technologies FieldFox B Series User Manual page 526

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
— Press Trace 6
— Then
— Then
— Then
— Then choose from the following
Record Source
The RawMeas data setting only applies to SA Mode.
For SA mode, the simplest way to use Record Playback is to record RawMeas
data, which can then be played back into all of the current Trace States.
However, for more complicated processing, refer to the following diagrams.
These figures illustrate where in the FieldFox data flow data is recorded and
played back.
For this discussion, it is important to understand Trace States. Learn more
in
Figure 18-2 FieldFox SA Mode: Data Flow and Record Playback Data Points
526
Record Playback
New Session or
as soon as a session is opened.
FreqMaskTrigger Configuration
— Edit Mask Create or modify the current mask. Learn how to edit the
Mask / Limit Line table in
— Save Mask Saves the current mask to a file.
— Recall Mask Loads a mask file.
"Trace Display States (SA Mode)" on page
Recall an existing session. The current mask appears
"All about Limit Lines" on page 715
198.
Keysight N9938-90006 User's Guide
.