Keysight Technologies FieldFox B Series User Manual page 482

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Figure 16-17 Using Maps Explorer to Set the Red and Blue Power Limits
Figure 16-18 Display Example: Color Coded Bar Scale Before Selecting x6 Colors
Figure 16-19 Display Example: Color Coded Bar Scale After Selecting x6 Colors
6. Verify you have enabled GPS. Refer to your measurements procedure and
7. Then press Esc >
482
c. Optional: Then Preferences
Discrete Colors
to "GNSS (GPS+) and GPS" on page
Back
Logging > Record Save/Recall
— Then File Folder Default System
— Default
> Discrete Colors
and change value as desired (Maximum = 6).
756.
> Trace 6 > More (required for OTA only) >
– Sets the default User Folder path:
Keysight N9938-90006 User's Guide
> Discrete Colors >
Data