Keysight Technologies FieldFox B Series User Manual page 424

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
Data Log-Play files are saved to:
11. Export KML file into 3rd party mapping software (i.e., Google Map or
12. Select Trace 6—choose:
424
— Then Maps To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
Then choose from the following:
— View Map OFF ON
(default = latitude/longitude = 0.00/00. Need GPS to view
current location (default = OFF).
— Data Selection
data channel, sort type, and sort order.
Learn more, refer to
Data Logging" on page
Management."
— Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
— Labels & Icons
map data point labels and icon types.
Labels OFF ON
Icons
Flag Point Line
— Save Image (PNG)
(default filename is "MapImageFile").
If File Folder is set to Default then Data Log-Play files are
—
save-recalled to:
"[CurrentDevice]\RecordPlayback\PAA"
If File Folders are set to System, then Data Log-Play files are
—
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
Google Earth). Refer to
Party Software (Example: Google Earth with Animation Tool)" on page
For this step, refer to
— Polar Size Max Med Min
sizes used to overlay PNG maps. (Default = Max)
To enable/disable the current map view
Opens a softkey menu to set the active
Chapter 16
486. See also,
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When
enabled, a label is displayed for every map data point
(e.g., "Data 1"). When disabled, labels are not
displayed for the map data points.
Sets the type of icon that is used to display a map's
data points.
Saves the current displayed map to a *.png file
"Step 7: Import and Play back KML Files into 3rd
Figure 14-6 on page 413.
Sets the size of the polar display. Smaller
Keysight N9938-90006 User's Guide
Mapping and "Setting up
Chapter 32, "File
437.