Advertisement
Channel Scanner (Option 312)
How to Set Up Channel Scanner
5. Press
6. Outdoor Mapping only: If recording, then:
Keysight N9938-90006 User's Guide
—
Record Indoor Data
refer to
Chapter 16
Setup Procedure" on page 474
on page
486.
d. Optional: Press
Signal Locate
finding (DF) bearing softkeys. Learn more, refer to
Mapping and
"How to Add Directional Finding (DF) Bearing" on
page
496.
Back
to return to previous menu.
—
View Map OFF ON
= latitude/longitude = 0.00/00. Need GPS to view current location
(default = OFF).
—
Pause Resume
Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue
recording.
—
Stop
Immediately stops recording and a "Save the Log File" menu
opens to rename and save your data log file.
— (Press
Record
to begin a new recording.)
— Then
Maps
To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
—
Data Selection
data channel, sort type, and sort order.
Learn more, refer to
Data Logging" on page
Management."
—
Red/Blue Limits
values to the red (high power limits) and blue (low power
limits) heat map display limits (defaults: Red Limit =
–20 dBm, Blue limit = –90 dBm).
—
Labels & Icons
map data point labels and icon types.
Labels
OFF ON
Icons
Flag Point Line
or
Recall Indoor Log
Mapping and
"Option 352 Indoor Maps
ans
– Opens a softkey menu of directional
To enable/disable the current map view (default
Opens a softkey menu to set the active
Chapter 16
486. See also,
Opens a softkey menu to assign power
Opens a softkey menu to enable/disable
Enables/Disables map data point labels. When
enabled, a label is displayed for every map data point
(e.g., "Data 1"). When disabled, labels are not
displayed for the map data points.
Sets the type of icon that is used to display a map's
data points (default = Flag).
File. Learn more,
"Setting up Data Logging"
Chapter 16
Mapping and
"Setting up
Chapter 32, "File
625
Advertisement
Chapters
