Keysight Technologies FieldFox B Series User Manual page 480

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Figure 16-16 Example of England Displayed Text
Import ZIP file using FieldFox Map Support Tool with Import Maps (ZIP)
3. If not done, connect your equipment similar to
480
e. Else, to import a *zip file (i.e., you can come back and do this later
after the mapping route is defined).
i. Press System 7 >
ii. Then to import map pictures, press
> Import Maps
iii. Press Import Maps (ZIP)
longitude values to view site maps from pictures (KML).
Prototype Phased Array Antenna – Option
Antennas – (Full Capability Requires EMF Option 358, and either SA mode
(Option 233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM Conducted
Option 378)", and to Figure 14-1 on page 409
See also,
— For setting up GPS Option 307, refer to
Settings," and then
— For setting up a phased array antenna, refer to
Rapid Prototype Phased Array Antenna – Option 360."
Utilities > Mapping
> Recall File
Chapter 14, "5G Rapid
360",
Chapter 30, "System
"GNSS (GPS+) and GPS" on page
Keysight N9938-90006 User's Guide
Map Explorer (Get Maps)
and change latitude and
Chapter 15, "USB
756.
Chapter 14, "5G