Keysight Technologies FieldFox B Series User Manual page 456

USB Antennas – (Full Capability Requires EMF Option 358, and either SA mode (Option
233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM Conducted Option 378)
Troubleshooting
Troubleshooting
If your USB antenna setup is not behaving as expected:
— Verify setup is correct by referring to
Preamplifier set to ON
456
page 451.
— If the FieldFox displays this error Error: USB antenna Error:
Not found is displayed, verify the USB antenna is
connected correctly or Unable to communicate with
antenna. Ensure it is connected. Verify the antenna
connection (i.e., Disconnect and reconnect the USB cable).
Press USB Antennas
If the FieldFox still displays the USB antenna error, try a different USB
antenna.
— If you are unable to view the X,Y, and Z antenna correction factors,
then:
Press Scale/Amptd >
— If you are having problems with your measurement, verify the antenna
corrections have been enabled:
Press Scale/Amptd >
"How to Set Up a USB Antenna" on
> Import Antenna
Corrections > Amp Corr Select
Corrections > Apply Corrections
Keysight N9938-90006 User's Guide
> TriAxis XYZ
> ON