Keysight Technologies FieldFox B Series User Manual page 234

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
234
Refer to next step for details on editing the antenna Settings
table.
b. Use the arrows, the rotary knob, or numeric keypad to select
the table cell value to be edited (i.e., the Frequency Interpolation
value is not editable). Then:
— Press Edit Antenna
press New
your existing antenna's file (i.e.,
data? is displayed above the table).
— Choose
— Choose
— Press Add Row
Factor values.
— Press Delete/Clear
—
—
—
— Press Done
c. Press Save Antenna
Saving Naming Options"
page 749.
For more information:
— See also "GNSS (GPS+) and GPS" on page
to edit your existing antenna factors or
to add a a new antenna's factors or to write over
Yes to write over the existing antenna file.
No to create a new antenna file (default
filename is Example).
to create additional Frequency and Antenna
then choose one of these:
Delete Row – when pressed this choice deletes the
currently selected row of Frequency and Antenna
Factors (i.e., you must press
No to exit the current softkey menu).
Clear All – when pressed this choice deletes all of
the currently selected rows of Frequency and
Antenna Factors (i.e., you must press
the rows or No to exit the current softkey menu).
Back – To exit to previous softkey menu.
when finished editing to exit.
to save your changes. See also
and then to "Alpha Numeric Editing" on
Keysight N9938-90006 User's Guide
Overwrite existing Antenna
Yes to delete a row or
Yes to deleted
Chapter , "File
756.