Tektronix Keithley 2651A Reference Manual page 811

Section 8: Troubleshooting guide
Error summary
Error number
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
4900
4901
4903
4904
4905
4906
5001
5003
5004
5005
5007
5008
5009
5010
5011
5012
5013
5014
5015
5016
5017
5018
5019
5021
5022
5023
5024
5025
5027
5028
5029
5032
8-6
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Error level Error message
RECOVERABLE TSPnet remote error: %s, where %s explains the remote error
RECOVERABLE TSPnet failure
RECOVERABLE TSPnet read failure
RECOVERABLE TSPnet read failure, aborted
RECOVERABLE TSPnet read failure, timeout
RECOVERABLE TSPnet write failure
RECOVERABLE TSPnet write failure, aborted
RECOVERABLE TSPnet write failure, timeout
RECOVERABLE TSPnet max connections reached
RECOVERABLE TSPnet connection failed
RECOVERABLE TSPnet invalid termination
RECOVERABLE TSPnet invalid reading buffer table
RECOVERABLE TSPnet invalid reading buffer index range
RECOVERABLE TSPnet feature only supported on TSP connections
RECOVERABLE TSPnet must specify both port and init
RECOVERABLE TSPnet disconnected by other side
RECOVERABLE Reading buffer index NN is invalid
RECOVERABLE The maximum index for this buffer is %d
RECOVERABLE Reading buffer expired
SERIOUS ICX parameter count mismatch, %s (Line #%d)
SERIOUS ICX parameter invalid value, %s (Line #%d)
SERIOUS ICX invalid function id, %s (Line #%d)
FATAL SMU is unresponsive. Disconnect DUT and cycle power
SERIOUS Saved calibration constants corrupted
RECOVERABLE Operation conflicts with CALA sense mode
RECOVERABLE Value too big for range
RECOVERABLE Operation would exceed safe operating area of the instrument
RECOVERABLE Operation not permitted while OUTPUT is on
SERIOUS Unknown sourcing function
SERIOUS No such SMU function
RECOVERABLE Operation not permitted while cal is locked
RECOVERABLE Cal data not saved - save or restore before lock
RECOVERABLE Cannot save cal data - unlock before save
RECOVERABLE Cannot restore cal data - unlock before restore
RECOVERABLE Save to cal set disallowed
RECOVERABLE Cannot change cal date - unlock before operation
RECOVERABLE Cannot change cal constants - unlock before operation
SERIOUS Cal version inconsistency
RECOVERABLE Cannot unlock - invalid password
SERIOUS Cannot restore default calset. Using previous calset
SERIOUS Cannot restore previous calset. Using factory calset
SERIOUS Cannot restore factory calset. Using nominal calset
SERIOUS Cannot restore nominal calset. Using firmware defaults
RECOVERABLE Cannot set filter.count > 1 when measure.count > 1
RECOVERABLE Unlock cal data with factory password
RECOVERABLE Cannot perform requested operation while source autorange is
enabled
RECOVERABLE Cannot save without changing cal adjustment date
RECOVERABLE Cannot change this setting unless buffer is cleared
2651A-901-01 Rev. C October 2021