Tektronix Keithley 2651A Reference Manual page 560

Model 2651A High Power System SourceMeter® Instrument Reference Manual
serial.parity
This attribute configures parity for the RS-232 port.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
parity = serial.parity
serial.parity = parity
parity
Details
A new parity setting takes effect when the command to change it is processed.
Allow ample time for the command to be processed before attempting to communicate with the
instrument again. If possible, set parity from one of the other command interfaces or from the front
panel.
The reset function has no effect on parity.
Example
serial.parity = serial.PARITY_NONE
Also see
RS-232 interface operation
serial.baud (on page 7-212)
serial.databits
serial.flowcontrol
2651A-901-01 Rev. C October 2021
Affected by
Not applicable
Set parity to one of the following values:
▪
Select no parity ("none" or serial.PARITY_NONE)
▪
Select even parity ("even" or serial.PARITY_EVEN)
▪
Select odd parity ("odd" or serial.PARITY_ODD)
(on page 2-90)
(on page 7-213)
(on page 7-214)
Section 7: TSP command reference
Where saved Default value
Nonvolatile memory "none" (serial.PARITY_NONE)
Sets parity to none.
7-215