Tektronix Keithley 2651A Reference Manual page 321

Section 6: Instrument programming
Rename a script
You can rename a script. You might want to rename a script if you need to name another script the
same name as the existing script. You could also rename an existing script to be the autoexec script.
To change the name of a script, use the command:
scriptVar.name = "renamedScript"
Where:
scriptVar
"renamedScript"
After changing the name, you need to save the original script to save the change to the name
attribute.
For example:
beepTwoSec.name = "beep2sec"
beepTwoSec.save()
Run the beep2sec script using the following command:
script.user.scripts.beep2sec()
6-48
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Figure 101: Create a new script with the name of an existing script
= The global variable name
The new name of the user script that was referenced by the
=
scriptVar global variable
2651A-901-01 Rev. C October 2021