Tektronix Keithley 2651A Reference Manual page 766

Model 2651A High Power System SourceMeter® Instrument Reference Manual
tsplink.group
This attribute contains the group number of a TSP-Link node.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
groupNumber = tsplink.group
tsplink.group = groupNumber
groupNumber
Details
To remove the node from all groups, set the attribute value to 0.
When the node is turned off, the group number for that node changes to 0.
The master node can be assigned to any group. You can also include other nodes in the group that
includes the master. Note that any nodes that are set to 0 are automatically included in the group that
contains the master node, regardless of the group that is assigned to the master node.
Example
tsplink.group = 3
Assign the instrument to TSP-Link group number 3.
Also see
Using groups to manage nodes on a TSP-Link system
2651A-901-01 Rev. C October 2021
Affected by Where saved
Power cycle Not applicable
The group number of the TSP-Link node (0 to 64)
Section 7: TSP command reference
Default value
0
(on page 6-64)
7-421