Tektronix Keithley 2651A Reference Manual page 524

Model 2651A High Power System SourceMeter® Instrument Reference Manual
localnode.reset()
This function resets the local node instrument.
Type TSP-Link accessible
Function Yes
Usage
localnode.reset()
Details
If you want to reset a specific instrument or a subordinate node, use the node[X].reset()
command.
A local node reset includes:
•
Source-measure unit (SMU) attributes affected by a SMU reset are reset
•
Other settings are restored back to factory default settings
A localnode.reset() is different than a reset() because reset() resets the entire system.
When using this command from a remote node, localnode should be replaced with the node
reference, for example node[5].reset().
Example
localnode.reset()
Resets the local node.
Also see
reset() (on page 7-197)
smuX.reset() (on page 7-264)
2651A-901-01 Rev. C October 2021
Affected by Where saved
Section 7: TSP command reference
Default value
7-179