Tektronix Keithley 2651A Reference Manual page 443

Section 7: TSP command reference
errorqueue.clear()
This function clears all entries out of the error queue.
Type TSP-Link accessible
Function Yes
Usage
errorqueue.clear()
Details
See Error queue
Also see
errorqueue.count
errorqueue.next()
errorqueue.count
This attribute gets the number of entries in the error queue.
Type TSP-Link accessible
Attribute (R) Yes
Usage
count = errorqueue.count
count
Example
count = errorqueue.count
print(count)
Returns the number of entries in the error queue.
The output below indicates that there are four entries in the error queue:
4.00000e+00
Also see
Error queue (on page 15-3)
errorqueue.clear()
errorqueue.next()
7-98
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
(on page 15-3) for additional information about the error queue.
(on page 7-98)
(on page 7-99)
Affected by
Power cycle
Clearing error queue
Reading error messages
The number of entries in the error queue
(on page 7-98)
(on page 7-99)
Where saved Default value
Where saved Default value
Not applicable Not applicable
2651A-901-01 Rev. C October 2021