Tektronix Keithley 2651A Reference Manual page 542

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Also see
ConfigPulseIMeasureV()
ConfigPulseIMeasureVSweepLin()
ConfigPulseIMeasureVSweepLog()
ConfigPulseVMeasureI()
ConfigPulseVMeasureISweepLin()
ConfigPulseVMeasureISweepLog()
KIPulse factory script
reset()
This function resets commands to their default settings.
Type TSP-Link accessible
Function No
Usage
reset()
reset(system)
system
Details
The reset() command in its simplest form resets the entire TSP-enabled system, including the
controlling node and all subordinate nodes.
If you want to reset a specific instrument, use either the localnode.reset() or
node[X].reset() command. Use the localnode.reset() command for the local instrument.
Use the node[X].reset() command to reset an instrument on a subordinate node.
You can only reset the entire system using reset(true) if the node is the master. If the node is not
the master node, executing this command generates an error.
Example
reset(true)
If the node is the master node, the entire system is reset; if the node is not the master node, an error is
generated.
Also see
localnode.reset()
2651A-901-01 Rev. C October 2021
(on page 7-38)
(on page 7-40)
(on page 7-42)
(on page 7-44)
(on page 7-47)
(on page 7-49)
(on page 5-23)
Affected by
What to reset:
▪
true: If the node is the master, the entire system is reset (default)
▪
false: Only the local group is reset
(on page 7-179)
Section 7: TSP command reference
Where saved Default value
7-197