Tektronix Keithley 2651A Reference Manual page 653

Section 7: TSP command reference
Example
smua.trigger.source.stimulus = digio.trigger[2].EVENT_ID
Configure to start its source action when a trigger event occurs on digital I/O line 2.
Also see
Triggering (on page 3-36)
smuX.trigger.SOURCE_COMPLETE_EVENT_ID
This constant contains the source complete event number.
Type TSP-Link accessible
Constant Yes
Usage
eventID = smuX.trigger.SOURCE_COMPLETE_EVENT_ID
eventID
Details
Set the stimulus of any trigger object to the value of this constant to have the trigger object respond to
source complete events from this source-measure unit (SMU).
Example
trigger.timer[1].stimulus = smua.trigger.SOURCE_COMPLETE_EVENT_ID
Trigger the timer when the SMU updates the source level or starts a pulse.
Also see
Triggering (on page 3-36)
7-308
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by Where saved
The source action complete event number
Default value
2651A-901-01 Rev. C October 2021