Tektronix Keithley 2651A Reference Manual page 483

Section 7: TSP command reference
lan.applysettings()
This function re-initializes the LAN interface with new settings.
Type TSP-Link accessible
Function Yes
Usage
lan.applysettings()
Details
Disconnects all existing LAN connections to the instrument and re-initializes the LAN with the present
configuration settings.
This function initiates a background operation. LAN configuration could be a lengthy operation.
Although the function returns immediately, the LAN initialization continues to run in the background.
Even though the LAN configuration settings may not have changed since the LAN was last
connected, new settings may take effect due to the dynamic nature of dynamic host configuration
protocol (DHCP) or dynamic link local addressing (DLLA) configuration.
Re-initialization takes effect even if the configuration has not changed since the last time the
instrument connected to the LAN.
Example
lan.applysettings()
Re-initialize the LAN interface with new settings.
Also see
None
7-138
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by Where saved Default value
2651A-901-01 Rev. C October 2021