Tektronix Keithley 2651A Reference Manual page 520

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Example 2
localnode.linefreq = 60
Also see
localnode.autolinefreq
localnode.model
This attribute stores the model number.
Type TSP-Link accessible
Attribute (R) Yes
Usage
model = localnode.model
model
Example
print(localnode.model)
Outputs the model number of the local node. For example:
2657A
Also see
localnode.serialno
localnode.password
This attribute stores the remote access password.
Type TSP-Link accessible
Attribute (W) Yes
Usage
localnode.password = "password"
password
Details
This write-only attribute stores the password that is set for any remote interface. When password
usage is enabled (localnode.passwordmode), you must supply a password to change the
configuration or to control an instrument from a remote command interface.
The instrument continues to use the old password for all interactions until the command to change it
executes. When changing the password, give the instrument time to execute the command before
attempting to use the new password.
You cannot retrieve a lost password from any command interface.
2651A-901-01 Rev. C October 2021
(on page 7-172)
Affected by
Not applicable
The model number of the instrument
(on page 7-180)
Affected by
LAN reset
LAN restore defaults
A string that contains the remote interface password, up to 255 characters
Sets the line frequency to 60 Hz.
Where saved
Not applicable
Where saved
Nonvolatile memory
Section 7: TSP command reference
Default value
Not applicable
Default value
""
7-175