Tektronix Keithley 2651A Reference Manual page 493

Section 7: TSP command reference
lan.config.speed
This attribute contains the LAN speed used when restarting in manual configuration mode.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
speed = lan.config.speed
lan.config.speed = speed
speed
Details
This attribute stores the speed that is used if the LAN is restarted for manual configuration operation.
This attribute does not indicate the actual setting presently in effect. Use the lan.status.speed
attribute to determine the present operating state of the LAN.
The LAN speed is measured in megabits per second (Mbps).
Example
lan.config.speed = 100
Also see
lan.restoredefaults()
lan.status.speed
7-148
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
LAN restore defaults
LAN speed setting in Mbps (10 or 100)
(on page 7-152)
(on page 7-159)
Where saved
Nonvolatile memory
Configure LAN speed for 100.
Default value
100 (100 Mbps)
2651A-901-01 Rev. C October 2021