Section 7: TSP command reference
trigger.wait()
This function waits for a command interface trigger event.
Type
TSP-Link accessible
Function
No
Usage
triggered = trigger.wait(timeout)
triggered
timeout
Details
This function waits up to timeout seconds for a trigger on the active command interface. A
command interface trigger occurs when:
•
A GPIB GET command is detected (GPIB only)
•
A VXI-11 device_trigger method is invoked (VXI-11 only)
•
A *TRG message is received
If one or more of these trigger events were previously detected, this function returns immediately.
After waiting for a trigger with this function, the event detector is automatically reset and rearmed.
This is true regardless of the number of events detected.
Example
triggered = trigger.wait(10)
print(triggered)
Waits up to 10 seconds for a trigger.
If false is returned, no trigger was detected during the 10-second timeout.
If true is returned, a trigger was detected.
Also see
trigger.clear()
7-420
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
true: A trigger was detected during the timeout period
false: No triggers were detected during the timeout period
Maximum amount of time in seconds to wait for the trigger
(on page 7-410)
Where saved
Default value
2651A-901-01 Rev. C October 2021
Need help?
Do you have a question about the Keithley 2651A and is the answer not in the manual?
Questions and answers