Tektronix Keithley 2651A Reference Manual page 498

Model 2651A High Power System SourceMeter® Instrument Reference Manual
lan.status.dns.address[N]
This attribute contains the DNS server IP addresses.
Type TSP-Link accessible
Attribute (R) Yes
Usage
dnsAddress = lan.status.dns.address[N]
dnsAddress
N
Details
This attribute is an array of DNS server addresses. The instrument can use up to three addresses.
Unused or disabled entries are returned as "0.0.0.0" when read. The dnsAddress returned is a
string specifying the IP address of the DNS server in dotted decimal notation.
You can only specify two addresses manually. However, the instrument uses up to three DNS server
addresses. If two are specified, only the one given by a DHCP server is used. If no entries are
specified, up to three address given by a DHCP server are used.
The value of lan.status.dns.address[1] is referenced first for all DNS lookups. The values of
lan.status.dns.address[2] and lan.status.dns.address[3] are referenced second and
third, respectively.
Example
print(lan.status.dns.address[1])
Outputs DNS server address 1, for example:
164.109.48.173
Also see
lan.status.dns.name
2651A-901-01 Rev. C October 2021
Affected by
Not applicable
DNS server IP address
Entry index (1, 2, or 3)
(on page 7-154)
Section 7: TSP command reference
Where saved Default value
Not applicable Not applicable
7-153