Tektronix Keithley 2651A Reference Manual page 257

Model 2651A High Power System SourceMeter® Instrument Reference Manual
Instrument identification
These commands store strings that describe the instrument.
localnode.description
localnode.model
localnode.revision
localnode.serialno
LAN and LXI
The LAN commands have options that allow you to review and configure network settings.
The lan.config.* commands allow you to configure LAN settings over the remote interface.
You must send lan.applysettings() for the configuration settings to take effect.
The lan.status.* commands help you determine the status of the LAN.
The lan.trigger[N].* commands allow you to set up and assert trigger events that are sent over
the LAN.
Other LAN commands allow you to reset the LAN, restore defaults, check LXI domain information,
and enable or disable the Nagle algorithm.
lan.applysettings()
lan.autoconnect
lan.config.dns.address[N]
lan.config.dns.domain
lan.config.dns.dynamic
lan.config.dns.hostname
lan.config.dns.verify
lan.config.duplex
lan.config.gateway
lan.config.ipaddress
lan.config.method
lan.config.speed
lan.config.subnetmask
lan.linktimeout
lan.lxidomain
lan.nagle (on page 7-151)
lan.reset() (on page 7-151)
lan.restoredefaults()
lan.status.dns.address[N]
lan.status.dns.name
lan.status.duplex
2651A-901-01 Rev. C October 2021
(on page 7-173)
(on page 7-175)
(on page 7-180)
(on page 7-180)
(on page 7-138)
(on page 7-139)
(on page 7-140)
(on page 7-141)
(on page 7-142)
(on page 7-143)
(on page 7-144)
(on page 7-144)
(on page 7-145)
(on page 7-146)
(on page 7-147)
(on page 7-148)
(on page 7-149)
(on page 7-149)
(on page 7-150)
(on page 7-152)
(on page 7-153)
(on page 7-154)
(on page 7-155)
Section 5: Remote commands
5-9