Chapter 5 Programmable Controller Settings; Melsec Iq-R Series Cpu Module (Built-In Ethernet Port Part); Ethernet Port Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

5
PROGRAMMABLE CONTROLLER SETTINGS
This section describes the programmable controller settings.
5.1
MELSEC iQ-R Series CPU Module (Built-in
Ethernet Port Part)

Ethernet port settings

Configure the Ethernet port settings using GX Works3.
Own node settings
[Navigation window]  [Parameter]  Module to be used  [Module Parameter]  [Basic Settings]  [Own Node
Settings]
1.
Set the IP address and subnet mask of a module to be used.
Set the IP address in the same segment as the network camera.
5 PROGRAMMABLE CONTROLLER SETTINGS
28

5.1 MELSEC iQ-R Series CPU Module (Built-in Ethernet Port Part)