Operation And Test; Self-Diagnostic Function; Monitoring And Debugging - Mitsubishi Electric MELSEC iQ-F Series User Manual

■Serial connection
COM port
(COM1)
1) RS-232 cable
(FX-232CAB-1)
GX Works3 settings
No. Item
1) PC side I/F
2) PLC side I/F
Other Station Setting
7.2

Operation and Test

Self-diagnostic function

When the power of the CPU module is turned on, the self-diagnostic function to check for errors starts in the module.
The CPU module boots when there is no error with the hardware, parameters, and program.
When there are no errors, the module enters the RUN status (the P.RUN LED turns on) in response to the RUN
instruction ( Page 95 Running, Stopping, and Resetting). If any error is detected, the "ERR" LED flashes or lights up.

Monitoring and debugging

The ON/OFF status of PLC's devices, current values or set values can be monitored or changed by using engineering
tools. For details, refer to GX Works3 Operating Manual.
7 OPERATION ADJUSTMENT
94
7.2 Operation and Test
FX5-232ADP
2)
Selection item
Serial/USB
PLC Module
No Specification
Internal setting
RS-232C
COM Port
Transmission Speed
PLC Mode
Check at Communication Time
Retry Times
Input value
COM1
115.2Kbps
FX5CPU
30 seconds
0 times